2015 used XCMG XS263J road roller

Short Description:

Our company mainly sells all kinds of second-hand road rollers, second-hand loaders, second-hand bulldozers, second-hand excavators, and second-hand graders, with long-term supply and high-quality service. Customers in need are welcome to consult online or call for details.


Product Detail

Product Tags

XCMG XS263J operation requirements

Preparation before homework

1. Check whether the working mechanism and fastening parts are in good condition.
2. Start the engine and confirm that it is normal after the test run, and the performance of the braking, steering and other working mechanisms are in good condition, and the road roller can be operated.
3. The tire pressure of the tire roller needs to be adjusted to the specified operating pressure range, and the pressure of each tire of the whole machine is the same.
4. Adjust the working line pressure of the roller to the specified value by increasing or decreasing the counterweight.
5. For the initial pressure of the soft roadbed and the area near the mountain, the site must be surveyed before the operation, and there should be no obstacles and people around the machine before starting. After confirming safety, you can drive into the operation.

Job requirements

1. During operation, the operator should always pay attention to the direction of the road roller, and follow the compaction process specified by the construction personnel.
2. Pay attention to the readings of each instrument during operation. If any abnormality is found, the cause must be found out and eliminated in time. Sick operation is strictly prohibited.
3. During operation, the amplitude and frequency of the vibratory roller should be controlled within the specified range.
4. The vibratory roller should stop vibrating before changing the driving direction, decelerating or stopping.
5. When multiple roadbed rollers work together, the specified formation and interval distance should be maintained, and corresponding communication signals should be established.
6. When rolling on a newly built road, it should be rolled from the middle to both sides, and the distance from the edge of the roadbed should not be less than one meter. When going uphill, the 5 speed change should be performed after braking. When the roller is driving on a slope, it is forbidden to change gears, and it is forbidden to slide out of gear. When rolling the mountain road, it must be rolled from the inside to the outside.


  • Previous:
  • Next:

  • Write your message here and send it to us