During use, some common faults may occur with second-hand rollers due to various factors. This article will analyze these common faults one by one and provide corresponding solutions.
（click here to view our new arrive of used tire roller in our warehouse）
Fault 1: The roller cannot start
Possible causes and solutions: (1) Power failure: Check whether the power switch is turned on and whether the plug is in good contact. (2) The battery is low: recharge or replace the battery. (3) Ignition system failure: Check whether the ignition coil and ignition plug are damaged, and replace them in time if they are damaged.
Fault 2: It is difficult for the roller to move
Possible causes and solutions: (1) Hydraulic system failure: Check whether the hydraulic oil is sufficient, and if it is insufficient, add it in time; check whether there is hydraulic oil leakage, and if so, repair the seal at the oil leakage area. (2) Running wheel failure: Clean the debris around the running wheel to ensure that the wheel can rotate normally.
Fault 3: The road roller vibrates abnormally
Possible causes and solutions: (1) Vibration shaft failure: Check whether the vibration shaft is worn, broken or loose. If there is any problem, replace or repair it in time. (2) Insufficient hydraulic oil in the vibration system: Check whether the hydraulic oil in the lubrication system is sufficient. If it is insufficient, add more. (3) The vibration spring is damaged: Check the status of the vibration spring and replace it if it is damaged.
Fault 4: Roller brake is not working properly
Possible causes and solutions: (1) Brake failure: Check whether the oil circuit of the brake is smooth, and clean it if it is blocked; check whether the brake friction plate is worn, and replace it if it is worn. (2) Insufficient brake fluid: Check whether the amount of brake fluid is sufficient, and add it in time if it is insufficient.
Fault 5: Roller engine overheating
Possible causes and solutions: (1) Insufficient coolant: Check whether the amount of coolant is sufficient, and add it in time if it is insufficient. (2) Fan failure: Check whether the fan is operating normally. If not, repair or replace the fan.
The above is only a brief introduction to some common faults and solutions that may occur with second-hand rollers. Of course, different models and brands of rollers may have different faults and solutions. For specific fault conditions, it is recommended that users carefully read the operating instructions of the road roller or consult professional maintenance personnel for handling. Maintenance and maintenance work is also very important, which can effectively reduce the probability of failure and extend the service life of the roller.
If you need to buy a second-hand roller or roller accessories, you can contact us. CCMIE will serve you wholeheartedly!
Post time: Oct-15-2024