Wheel loader LONKING LG855B in China for sale
Products Description
Lonking LG8025B wheel loader has a bucket capacity of 0.85m3, a rated load of 3 tons, a rated load of 2400kg, a digging force (breakout force) of 37.5kN, an operating weight of 4300kg, and a maximum unloading height of 3300mm.
Performance characteristics
1. The engine is properly matched to maximize its performance, energy saving and environmental protection.
2. The unloading height of the working device is high, the bucket can be automatically leveled, the lifting translation is good, and it is not easy to spread materials.
3. The hydraulic oil has a good heat dissipation effect, which improves the service life of hydraulic components; the diesel oil has a large capacity, which prolongs working hours and improves production efficiency.
4. The parts are easy to disassemble and assemble, and the maintainability is good. The A series multi-way valve is installed under the cab, which saves effort in operation; the bottom plate of the cab has manholes, and the fuel tank can be rotated, which is convenient for maintenance.
5. The structural parts are made of high-quality steel to ensure their strength.
6. The front and rear wheelbases are well arranged, and the turning radius is small, which is suitable for operations in narrow spaces.
7. The appearance is novel, beautiful and elegant, with obvious safety signs and excellent welding technology.
Tips:
Q: Why does the loader suddenly not turn when it is in a normal driving state, and the steering wheel does not move at the same time?
A: The steering pump roll key or the spline of the connecting sleeve is damaged, the one-way valve of the steering gear falls off (in the valve body), the 8mn steel ball (one-way valve) in the steering gear is faulty, replace the steering pump or the connecting sleeve , Replace the valve block or check valve.
Q: Why does the whole machine suddenly stop working after the second gear is engaged when driving normally?
A: Check whether the working pressure of this gear and other gears is normal.
Q: What should I do if the auto-steering steering wheel cannot automatically return to the center position?
A: The return spring in the steering gear is damaged. Remedy: replace the return spring or steering gear assembly.
Q: Why is the shift pressure low and the whole machine weak when the transmission is in neutral or in gear?
A: The amount of transmission oil in the transmission is insufficient, the filter of the transmission oil pan is blocked, the travel pump is damaged, the volumetric efficiency is low, the pressure of the pressure reducing valve or the inlet pressure valve is not adjusted properly, the oil suction pipe of the travel pump is aged or seriously damaged bending. The hydraulic oil in the transmission should be added to the middle of the oil standard when idling, the filter should be replaced or cleaned, the walking pump should be replaced, the pressure should be readjusted to the specified range, and the oil line should be replaced.
